Datasheet
数据手册 > 微控制器,MCU,单片机 > Microchip > PIC16F627-20/P 数据手册PDF > PIC16F627-20/P 用户编程手册 第 1/22 页
PIC16F627-20/P
¥ 23.90
百芯的价格

PIC16F627-20/P 用户编程手册 - Microchip

  • 制造商:
    Microchip
  • 分类:
    微控制器,MCU,单片机
  • 封装
    PDIP-18
  • 描述:
    MICROCHIP PIC16F627-20/P 8Bit Microcontroller, Flash, PIC16F6xx, 20MHz, 1.75KB, 224Byte, 18Pins, DIP
更新时间: 2024-11-06 14:22:54 (UTC+8)

PIC16F627-20/P 用户编程手册

页码:/22页
下载 PDF
重新加载
下载
2002 Microchip Technology Inc. Preliminary DS30034D-page 1
PIC16F62X
This document includes the
programming specifications for the
following devices:
PIC16F627
PIC16F628
PIC16LF627
PIC16LF628
1.0 PROGRAMMING THE
PIC16F62X
The PIC16F62X is programmed using a serial method.
The Serial mode will allow the PIC16F62X to be pro-
grammed while in the users system. This allows for
increased design flexibility. This programming specifi-
cation applies to PIC16F62X devices in all packages.
PIC16F62X devices may be programmed using a sin-
gle +5 volt supply (Low Voltage Programming mode).
1.1 Hardware Requirements
The PIC16F62X requires one programmable power
supply for V
DD (4.5V to 5.5V) and a VPP of 12V to 14V,
or V
PP of 4.5V to 5.5V, when using low voltage. Both
supplies should have a minimum resolution of 0.25V.
1.2 Programming Algorithm Requires
Variable V
DD
The PIC16F62X uses an intelligent algorithm. The
algorithm calls for program verification at V
DDMIN as
well as V
DDMAX. Verification at VDDMIN ensures good
“erase margin”. Verification at V
DDMAX ensures good
“program margin”.
The actual programming must be done with VDD in the
V
DDP range.
V
DDP = VCC range required during programming.
V
DDMIN = minimum operating VDD spec for the part.
V
DDMAX = maximum operating VDD spec for the part.
Programmers must verify the PIC16F62X is at its spec-
ified V
DDMAX and VDDMIN levels. Since Microchip may
introduce future versions of the PIC16F62X with a
broader VDD range, it is best that these levels are user
selectable (defaults are ok).
1.3 Programming Mode
The Programming mode for the PIC16F62X allows pro-
gramming of user program memory, data memory,
special locations used for ID, and the configuration
word.
Note: All references to PIC16F62X also apply to
PIC16LF62X.
Note: Any programmer not meeting these
requirements may only be classified as a
“prototype” or “development” programmer,
not a “production” quality programmer.
PIC16F62X EEPROM Memory Programming Specification

PIC16F627-20/P 数据手册 PDF

PIC16F627-20/P 数据手册
Microchip
171 页, 2753 KB
PIC16F627-20/P 产品设计参考
Microchip
137 页, 5965 KB
PIC16F627-20/P 用户编程手册
Microchip
22 页, 264 KB
PIC16F627-20/P 其它数据手册
Microchip
170 页, 3924 KB
PIC16F627-20/P 应用笔记
Microchip
24 页, 483 KB
PIC16F627-20/P 产品描述及参数
Microchip
18 页, 600 KB
PIC16F627-20/P 产品修订记录
Microchip
2 页, 111 KB
PIC16F627-20/P 其他参考文件
Microchip
4 页, 162 KB

PIC16F62720 数据手册 PDF

PIC16F627-20 数据手册
Microchip
FLASH-Based 8Bit CMOS Microcontroller
PIC16F627-20I/P 数据手册
Microchip
MICROCHIP PIC16F627-20I/P 8Bit Microcontroller, Flash, PIC16F, 20MHz, 1.75KB, 224Byte, 18Pins, DIP
PIC16F627-20/P 数据手册
Microchip
MICROCHIP PIC16F627-20/P 8Bit Microcontroller, Flash, PIC16F6xx, 20MHz, 1.75KB, 224Byte, 18Pins, DIP
PIC16F627-20/SS 数据手册
Microchip
MCU 8Bit PIC16 PIC RISC 1.75KB Flash 3.3V/5V 20Pin SSOP Tube
PIC16F627-20/SO 数据手册
Microchip
MCU 8Bit PIC RISC 1.75KB Flash 3.3V/5V 18Pin SOIC W Tube
PIC16F627-20E/SO 数据手册
Microchip
MCU 8Bit PIC RISC 1.75KB Flash 3.3V/5V 18Pin SOIC W Tube
PIC16F627-20I/SO 数据手册
Microchip
MCU 8Bit PIC16 PIC RISC 1.75KB Flash 3.3V/5V 18Pin SOIC W Tube
PIC16F627-20I/SS 数据手册
Microchip
MCU 8Bit PIC16 PIC RISC 1.75KB Flash 3.3V/5V 20Pin SSOP Tube
PIC16F627-20E/SS 数据手册
Microchip
MCU 8Bit PIC16 PIC RISC 1.75KB Flash 3.3V/5V 20Pin SSOP Tube
PIC16F627-20E/P 数据手册
Microchip
MCU 8Bit PIC16 PIC RISC 1.75KB Flash 3.3V/5V 18Pin PDIP Tube
Datasheet 搜索
搜索
百芯智造数据库涵盖1亿多个数据手册,每天更新超过5,000个PDF文件。
在线联系我们
黄经理 - 百芯智造销售经理在线,5 分钟前
您的邮箱 *
消息 *
发送