Datasheet
数据手册 > 8位,控制器 > Microchip > PIC16F1459-I/SS 数据手册PDF > PIC16F1459-I/SS 用户编程手册 第 1/38 页

PIC16F1459-I/SS 用户编程手册 - Microchip

更新时间: 2025-04-22 07:05:48 (UTC+8)

PIC16F1459-I/SS 用户编程手册

页码:/38页
下载 PDF
重新加载
下载
2011-2012 Microchip Technology Inc. Advance Information DS41620C-page 1
This document includes the
programming specifications for the
following devices:
1.0 OVERVIEW
The devices can be programmed using either the high-
voltage In-Circuit Serial Programming™ (ICSP™)
method or the low-voltage ICSP™ method.
When using low-voltage ICSP™ programming
(LVP = 1), the ICSPDAT/ICSPCLK functions are
additionally enabled on the RA0/RA1 port pins. This
legacy programming feature provides compatibility
support for existing PIC18F1XK50 designs. For new
designs, using the ICSPDAT/ICSPCLK functions on
the RC0/RC1 port pins is recommended.
For Legacy Programming Support, refer to
Section 4.2.1 “Legacy ICSP Pinout Programming.
1.1 Hardware Requirements
1.1.1 HIGH-VOLTAGE ICSP
PROGRAMMING
In High-Voltage ICSP™ mode, these devices require
two programmable power supplies: one for V
DD and
one for the MCLR
/VPP pin.
1.1.2 LOW-VOLTAGE ICSP
PROGRAMMING
In Low-Voltage ICSP™ mode, these devices can be
programmed using a single VDD source in the
operating range. The MCLR/VPP pin does not have to
be brought to a different voltage, but can instead be left
at the normal operating voltage.
1.1.2.1 Single-Supply ICSP Programming
The LVP bit in Configuration Word 2 enables single-
supply (low-voltage) ICSP programming. The LVP bit
defaults to a ‘1’ (enabled) from the factory. The LVP bit
may only be programmed to ‘0’ by entering the High-
Voltage ICSP mode, where the MCLR
/VPP pin is raised
to V
IHH. Once the LVP bit is programmed to a ‘0’, only
the High-Voltage ICSP mode is available and only the
High-Voltage ICSP mode can be used to program the
device.
PIC16F1454 PIC16LF1454
PIC16F1455 PIC16LF1455
PIC16F1459 PIC16LF1459
Note 1: The High-Voltage ICSP mode is always
available, regardless of the state of the
LVP bit, by applying VIHH to the MCLR/
VPP pin.
2: While in Low-Voltage ICSP mode, MCLR
is always enabled, regardless of the
MCLRE bit, and the port pin can no
longer be used as a general purpose
input.
PIC16(L)F145X Memory Programming Specification
PIC16(L)F145X
页面指南

PIC16F1459-I/SS 数据手册 PDF

PIC16F1459-I/SS 数据手册
Microchip
10 页, 115 KB
PIC16F1459-I/SS 用户编程手册
Microchip
38 页, 463 KB
PIC16F1459-I/SS 其它数据手册
Microchip
16 页, 229 KB
PIC16F1459-I/SS 产品修订记录
Microchip
3 页, 157 KB
PIC16F1459-I/SS 其他参考文件
Microchip
4 页, 164 KB

PIC16F1459 数据手册 PDF

PIC16F1459-I/SS
数据手册
Microchip
MCU 8Bit PIC16 PIC RISC 14KB Flash 3.3V/5V 20Pin SSOP Tube
PIC16F1459-I/ML
数据手册
Microchip
MCU 8Bit PIC16 PIC RISC 14KB Flash 3.3V/5V 20Pin QFN EP Tube
PIC16F1459-I/P
数据手册
Microchip
MICROCHIP PIC16F1459-I/P 8Bit Microcontroller, Flash, PIC16F145x, 48MHz, 14KB, 1KB, 20Pins, DIP
PIC16F1459-I/SO
数据手册
Microchip
MCU 8Bit PIC16 PIC RISC 14KB Flash 3.3V/5V 20Pin SOIC W Tube
PIC16F1459T-I/SS
数据手册
Microchip
MCU 8Bit PIC16 PIC RISC 14KB Flash 3.3V/5V 20Pin SSOP T/R
PIC16F1459-E/SO
数据手册
Microchip
MCU 8Bit PIC16 PIC RISC 14KB Flash 3.3V/5V Automotive 20Pin SOIC W
PIC16F1459T-I/SO
数据手册
Microchip
MCU 8Bit PIC RISC 14KB Flash 3.3V/5V Automotive 20Pin SOIC W T/R
PIC16F1459-E/SS
数据手册
Microchip
MCU 8Bit PIC16 PIC RISC 14KB Flash 3.3V/5V 20Pin SSOP Tube
PIC16F1459T-I/GZ
数据手册
Microchip
MCU 8Bit PIC RISC 14KB Flash 3.3V/5V Automotive 20Pin UQFN T/R
PIC16F1459T-I/ML
数据手册
Microchip
MCU 8Bit PIC RISC 14KB Flash 3.3V/5V Automotive 20Pin QFN EP T/R
Datasheet 搜索
搜索
百芯智造数据库涵盖1亿多个数据手册,每天更新超过5,000个PDF文件。
相关文档: PIC16F1459 数据手册
在线联系我们
黄经理 - 百芯智造销售经理在线,5 分钟前
您的邮箱 *
消息 *
发送