下载
© Freescale Semiconductor, Inc., 2009. All rights reserved.
AN3945
Rev 0, 9/2009
Freescale Semiconductor
Application Note
Communication Protocol for the
RD3803MMA7660FC
by: Laura Salhuana
INTRODUCTION
This document is intended to be used with the RD3803MMA7660FC. All of the commands described below can be used to
communicate with the evaluation tool and should be used with the HyperTerminal type of program.
S08MON – PC TO S08 VARIABLES MONITORING COMMUNICATION COMMANDS
To Run: Run HyperTerminal. Configure the device with the settings as shown in Figure 1.
Figure 1. HyperTerminal Settings for Device
