下载
All Rights Reserved. No part of this document may be copied or reproduced in any form without the prior written permission of Discera, Inc. Discera Inc. may update or make
changes to the contents, products, programs or services described at any time without notice. This document neither states nor implies any kind of warranty, including, but not
limited to implied warranties of merchantability or fitness for a particular use.
Page 1 | 2010-10-25
DSC8001 Series
1.8~3.3V
Programmable PureSilicon™ Oscillator
Datasheet
MK-Q-B-P-D-090110-03-2
General Description
The DSC8001 is a programmable silicon MEMS
based CMOS oscillator offering excellent jitter
and stability performance over a wide range of
supply voltages and temperatures. The device
operates from 1 to 150MHz in increments of
100Hz (up to four decimal point resolution) with
supply voltages between 1.8 to 3.3 Volts and
extended temperatures from -40ºC to 105ºC.
The DSC8001 incorporates an all silicon
resonator that is extremely robust and nearly
immune to stress related fractures, common to
crystal based oscillators. Without sacrificing the
performance and stability required of today’s
systems, a crystal-less design allows for a
higher level of reliability, making the DSC8001
ideal for rugged, industrial, and portable
applications where stress, shock, and vibration
can damage quartz crystal based systems.
Available in industry standard packages, the
DSC8001 can be “dropped-in” to the same PCB
footprint as standard crystal oscillators.
Block Diagram
Standby#
PFD
VCO
Frac-N
PLL
Resonator
OutputV
DD
GND
(pin1)
Standby#
PFD
VCO
Frac-N
PFD
VCO
Frac-N
PLL
Resonator
OutputV
DD
GND
(pin1)
Features
Frequency Range: Programmable from
1 to 150MHz
Exceptional Stability over Temperature
o ±10 PPM, ±25 PPM, ±50 PPM
Operating voltage
o 1.7 to 3.6V
Operating Temperature Range
o Ext. Industrial -40ºC to 105ºC
o Industrial -40ºC to 85ºC
o Ext. Commercial -20ºC to 70ºC
o Commercial 0ºC to 70º
Low Operating and Standby Current
o 5mA Operating (40MHz)
o 15uA Standby
Ultra Miniature Footprint
o 2.5 x 2.0 x 0.85 mm
o 3.2 x 2.5 x 0.85 mm
o 5.0 x 3.2 x 0.85 mm
o 7.0 x 5.0 x 0.85 mm
Excellent shock and Vibration
Resistance
Lead Free, RoHS & Reach SVHC
Compliant
Benefits
Pin for pin “drop in” replacement for
industry standard oscillators
Semiconductor level reliability,
significantly higher than quartz
Frequency Resolution to 4 decimals
Short mass production lead-times
Longer Battery Life / Reduced Power
Compact Plastic package
Cost Effective
Applications
Mobile Applications
Consumer Electronics
Portable Electronics
DVR, CCTV, Surveillance Cameras
Low Profile Applications
Industrial
页面指南
