onlinecomponents.com
Data Sheet
December 1, 2010
Austin Lynx
TM
SIP Non-isolated Power Modules, Programmable:
3Vdc – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A Output Current
* UL is a registered trademark of Underwriters Laboratories, Inc.
†
CSA is a registered trademark of Canadian Standards Association.
‡
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS05-007 ver. 1.43
PDF name: lynx_sip_x3_ds.pdf
Features
Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
Delivers up to 10A output current
High efficiency – 95% at 3.3V full load (V
IN
= 5.0V)
Small size and low profile:
50.8 mm x 12.7 mm x 8.10 mm
(2.00 in x 0.5 in x 0.32 in)
Low output ripple and noise
High Reliability:
Calculated MTBF = 15.7 M hours at 25
o
C Full-load
Constant switching frequency (300 kHz)
Output voltage programmable from 0.75 Vdc to
3.63Vdc via external resistor
Line Regulation: 0.3% (typical)
Load Regulation: 0.4% (typical)
Temperature Regulation: 0.4 % (typical)
Remote On/Off
Remote Sense
Over temperature protection
Output overcurrent protection (non-latching)
Wide operating temperature range (-40°C to 85°C)
UL* 60950-1Recognized, CSA
†
C22.2 No. 60950-1-
03 Certified, and VDE
‡
0805:2001-12 (EN60950-1)
Licensed
ISO** 9001 and ISO 14001 certified manufacturing
facilities
Applications
Distributed power architectures
Intermediate bus voltage applications
Telecommunications equipment
Servers and storage applications
Networking equipment
Enterprise Networks
Latest generation IC’s (DSP, FPGA, ASIC)
and Microprocessor powered applications
Description
Austin Lynx
TM
SIP power modules are non-isolated dc-dc converters that can deliver up to 10A of output current
with full load efficiency of 95% at 3.3V output. These modules provide a precisely regulated output voltage
programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage (V
IN
= 3.0 –
5.5Vdc). Their open-frame construction and small footprint enable designers to develop cost- and space-efficient
solutions.
RoHS Compliant
