下载
September 2006 Rev 1 1/330
UM0218
User manual
STR75x Software Library
Introduction
About This Manual
This document is the STR75x software library user manual. It describes the STR75x
peripheral software library: a collection of routines, data structures and macros that cover
the features of each peripheral.
This manual is structured as follows: some definitions, document conventions and software
library rules are provided in Chapter 1. Chapter 2 provides a detailed description of the
software library: The package content, the installation steps, the library structure and an
example on how to use the library. Finally, Chapters 3 to 20 describe the software library,
peripheral configuration structure and function descriptions for each peripheral in detail.
About STR75x Library
The STR75x software library is a software package consisting of device drivers for all
standard STR75x peripherals. You can use any STR75x device in applications without in-
depth study of each peripheral specification. As a result, using this library can save the you
a lot of the time that you would otherwise spend in coding and also the cost of developing
and integrating your application.
Each device driver consists of a set of functions covering the functionality of the peripheral.
Since all the STR75x peripherals and their corresponding registers are memory-mapped, a
peripheral can be easily controlled using ‘C’ code. The source code, developed in ‘C’, is fully
documented. A basic knowledge of ‘C’ programming is required.
The library contains a complete software in ‘C’ that can be easily ported to any ARM
compatible ‘C’ compiler.
www.st.com
