下载
June 2008 Rev 2 1/59
UM0549
User manual
STM3210E-EVAL demonstration software
Introduction
This user manual describes the demonstration firmware running on the STM3210E-EVAL
evaluation board, which can be used to evaluate the capabilities of the High-density
STM32F103ZE(T6) microcontroller and on-board peripherals.
The STM3210E-EVAL board is delivered with the demonstration and the DFU (device
firmware upgrade) programmed in the internal Flash memory, and all the files needed by the
demonstration are programmed in the NOR Flash memory. At each reset (board power-up,
external reset, etc.) the demonstration is executed. To run the DFU, the Key push-button
must be kept pressed at reset.
In case the STM3210E-EVAL board was not factory-programmed, the demonstration
application was erased or the NOR Flash memory contents were modified, the DFU can be
used to program those files. For more details, refer to Section 2 and Section 3.
This demonstration firmware, the USB library, and other such firmware are available for
download from the STMicroelectronics website: www.st.com.
www.st.com
