Datasheet
数据手册 > 接口,隔离器 > ADI > ADUM1401ARWZ-RL 数据手册PDF > ADUM1401ARWZ-RL 产品设计参考 第 1/9 页
ADUM1401ARWZ-RL
¥ 47.38
百芯的价格

ADUM1401ARWZ-RL 产品设计参考 - ADI

更新时间: 2024-06-05 08:43:57 (UTC+8)

ADUM1401ARWZ-RL 产品设计参考

页码:/9页
下载 PDF
重新加载
下载
EVAL-3CH4CHSOICEBZ User Guide
UG-935
One Technology Way P. O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com
Using the EVAL-3CH4CHSOICEBZ iCoupler Data Isolator Evaluation Board
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. A | Page 1 of 9
FEATURES
Access to all 4 data channels
Enable/disable controls
Multiple connection options
Support for active probes
Provision for cable terminations
Support for printed circuit board (PCB) edge mounted
coaxial connectors
Easy configuration
Sample iCoupler digital isolator must be ordered separately
SUPPORTED iCoupler GENERICS
ADuM130D/ADuM130E/ADuM131D/ADuM131E
ADuM140D/ADuM140E/ADuM141D/ADuM141E/ADuM142D/
ADuM142E
ADuM230D/ADuM230E/ADuM231D/ADuM231E
ADuM240D/ADuM240E/ADuM241D/ADuM241E/ADuM242D/
ADuM242E
EVALUATION BOARD PHOTOGRAPH
Figure 1.
GENERAL DESCRIPTION
The EVA L -3CH4CHSOICEBZ evaluation board supports triple-
and quad-channel standard data isolators in 16-lead SOIC
packages. The evaluation board provides a JEDEC standard
16-lead SOIC_N and SOIC_W pad layout and routing appropriate
for the evaluation of supported devices. The evaluation board
provides a connection to power supplies by screw terminals and
includes optimal bypass capacitors. Signal channel routing supports
signal distribution and loopback, and provides positions for
loads referenced to the VDD1/VDD2 and GND1/GND2 planes.
Signal sources can be conducted to the board through header
pins or edge mounted SMA connectors; SMA connectors must be
ordered separately. Positions for through hole 0.2 inch headers
compatible with active probes are provided on the PCB; probe
header pins must be ordered separately.
The board follows PCB design practices for 4-layer boards,
including a full power and ground plane on each side of the
isolation barrier. No other electromagnetic interference (EMI)
or noise mitigation design features are included on the board. In
cases of very high speed operation or when ultralow emissions
are required, refer to the AN-1109 application note for additional
board layout techniques.
Full specifications for the device under test (DUT) are available in
the corresponding product data sheet, which should be consulted
in conjunction with this user guide when using the evaluation
board.
14276-001
页面指南

ADUM1401ARWZ-RL 数据手册 PDF

ADUM1401ARWZ-RL 数据手册
ADI
31 页, 618 KB
ADUM1401ARWZ-RL 产品设计参考
ADI
9 页, 308 KB
ADUM1401ARWZ-RL 用户编程手册
ADI
6 页, 338 KB
ADUM1401ARWZ-RL 其它数据手册
ADI
31 页, 616 KB
ADUM1401ARWZ-RL 应用笔记
ADI
8 页, 281 KB
ADUM1401ARWZ-RL 产品修订记录
ADI
5 页, 83 KB
ADUM1401ARWZ-RL 其他参考文件
ADI
1 页, 158 KB

ADUM1401 数据手册 PDF

ADUM1401ARWZ
数据手册
ADI
Digital Isolator, Quad, 4Channel, 100ns, 2.7V, 5.5V, SOIC, 16Pins
ADUM1401BRWZ
数据手册
ADI
ANALOG DEVICES ADUM1401BRWZ Digital Isolator, Quad, 4Channel, 50ns, 2.7V, 5.5V, SOIC, 16Pins
ADUM1401CRWZ
数据手册
ADI
ANALOG DEVICES ADUM1401CRWZ Digital Isolator, Quad, 4Channel, 32ns, 2.7V, 5.5V, SOIC, 16Pins
ADUM1401ARWZ-RL
数据手册
ADI
ANALOG DEVICES ADUM1401ARWZ-RL Digital Isolator, Quad, 4Channel, 100ns, 2.7V, 5.5V, SOIC, 16Pins
ADUM1401BRWZ-RL
数据手册
ADI
Digital Isolator CMOS 4CH 10Mbps 16Pin SOIC W T/R
ADUM1401CRWZ-RL
数据手册
ADI
ANALOG DEVICES ADUM1401CRWZ-RL Digital Isolator, Quad, 4Channel, 32ns, 2.7V, 5.5V, SOIC, 16Pins
ADUM1401WTRWZ
数据手册
ADI
Digital Isolator CMOS 4CH 10Mbps Automotive 16Pin SOIC W Tube
ADUM1401WSRWZ
数据手册
ADI
Digital Isolator CMOS 4CH 1Mbps Automotive 16Pin SOIC W Tube
ADUM1401WSRWZ-RL
数据手册
ADI
Digital Isolator CMOS 4CH 1Mbps Automotive 16Pin SOIC W T/R
ADUM1401ARW
数据手册
ADI
Digital Isolator CMOS 4Channel 1Mbps 16Pin SOIC
Datasheet 搜索
搜索
百芯智造数据库涵盖1亿多个数据手册,每天更新超过5,000个PDF文件。
相关文档: ADUM1401 数据手册
在线联系我们
黄经理 - 百芯智造销售经理在线,5 分钟前
您的邮箱 *
消息 *
发送