下载
747
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
P&B
Catalog 1308242
Issued 3-03
Features
• Sockets mount on standard 35mm DIN track & P&B “top hat” track.
• Spring loaded integral clip holds sockets securely to the track.
• Small screwdriver can be used to release sockets from track.
• Any available hold-down springs must be ordered separately. See Relay
& Socket Usage Chart beginning on page 747.
• End clips can be used to further stabilize sockets on track.
DIN Rail Mount
Screw Terminal Socket
Track Mounting System
File E59244
File LR35144
24A110 – DIN Rail Style Mounting Track
24A110 mounting track is designed to accept snap-mount sockets, as well
as all other P&B screw terminal sockets. Track is made of lightweight,
sturdy extruded aluminum and is shipped in three-foot (914cm) lengths with
mounting holes on six-inch (152mm) centers. Track can be cut to shorter
lengths or used end-to-end.
24A071 & 40G432 – End Clip
24A071 steel mounting clip with one #6-32 screw 7/16" (11.1mm) long is
used with a 40G432 insulator to prevent sockets from moving sideways or
sliding off the end of the track.
Our authorized distributors are more like to stock the items listed below in boldface.
24A071
40G432
Location of Socket Dimensions
Typical Relay Base Socket Part Number Page
KRPA (DPDT) 8-pin octal-type 27E891 741
KRPA (3PDT) 11-pin octal-type 27E892 741
KUP 11-blade square 27E893 730
KH, PCL 14-blade square 27E894 712
K10, PCLH 8-blade square 27E895 722
RT (code 1) 5-blade square RT78624 452
RT (codes 3 & 5) 8-blade square RT87625 452
MT (DPDT) 8-pin octal-type MT78755 743
MT (3PDT) 11-pin octal-type MT78750 743
RM 11-blade square RM78705 736
PT (DPDT) 8-blade square PT78702 719
PT (3PDT) 11-blade square PT78703 719
PT (4PDT) 14-blade square PT78704 719
1.375 ± .010
(34.93 ± .254)
.405 ± .007
(10.29 ± .178)
6.00
(152.4)
3.00
(76.2)
.750
(19.05)
.187
(4.75)
36.00 ± .060
(914.4 ± 1.52)
Part Number Description
24A110 DIN rail style extruded aluminum mounting track for DIN or standard sockets.
24A071 Steel mounting clip with one #6-32 screw 7/16" (11.1mm) long. Use with 40G432 below to make end clip.
40G432 Plastic insulator. Use with 24A071 above to make end clip.
