下载
This is information on a product in full production.
January 2017 DocID027937 Rev 3 1/35
VND5E004C30
Double 4 mhigh-side driver with analog CurrentSense for
automotive applications
Datasheet - production data
Features
AEC-Q100 qualified
General
– Very low standby current
– 3.0 V CMOS compatible inputs
– Optimized electromagnetic emissions
– Very low electromagnetic susceptibility
– Compliant with European directive
2002/95/EC
– Very low current sense leakage
Diagnostic functions
– Proportional load current sense
– High current sense precision for wide
currents range
– Diagnostic enable pin
– Off-state open-load detection
– Output short to V
CC
detection
– Overload and short to ground (power
limitation) indication
– Thermal shutdown indication
Protection
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self limiting of fast thermal transients
– Protection against loss of ground and loss
of V
CC
– Overtemperature shutdown with auto
restart (thermal shutdown)
– Inrush current active management by
power limitation
– Reverse battery protection with self switch-
on of the Power MOSFET
– Electrostatic discharge protection
Applications
All types of resistive, inductive and capacitive
loads
Suitable for power management applications
Description
The device is a double channel high-side driver
manufactured using ST proprietary VIPower
®
M0-5 technology and housed in a
MultiPowerSO-30 package. The device is
designed to drive 12 V automotive grounded
loads, and to provide protection and diagnostics.
It also implements a 3 V and 5 V CMOS-
compatible interface for use with any
microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, overtemperature shut-off with auto-
restart and overvoltage active clamp. A dedicated
analog current sense pin is associated with every
output channel providing enhanced diagnostic
functions including fast detection of overload and
short-circuit to ground through power limitation
indication, overtemperature indication, short-
circuit to V
CC
diagnosis and on-state and off-state
open-load detection. The current sensing and
diagnostic feedback of the whole device can be
disabled by pulling the DE pin low to share the
external sense resistor with similar devices.
Max transient supply voltage V
CC
41 V
Operating voltage range V
CC
4.5 to 28 V
Max on-state resistance (per ch.) R
ON
4 m
Current limitation (typ) I
LIMH
90 A
Off-state supply current I
S
2 µA
(1)
1. Typical value with all loads connected
0XOWL3RZHU6
*$3*&)7
www.st.com
页面指南
