Datasheet
数据手册 > 光敏,传感器 > VISHAY > VEML6075 数据手册PDF > VEML6075 应用笔记 第 1/23 页

VEML6075 应用笔记 - VISHAY

  • 制造商:
    VISHAY
  • 分类:
    光敏,传感器
  • 封装
    OPLGA-4
  • 描述:
    VEML6075 Series 3.6V 2 x 1.25 x 1mm UVA and UVB Light Sensor with I2C Interface
更新时间: 2024-04-28 19:09:24 (UTC+8)

VEML6075 应用笔记

页码:/23页
下载 PDF
VISHAY SEMICONDUCTORS
Optical Sensors
Application Note
Designing the VEML6075 into an Application
www.vishay.com
Revision: 08-Sep-16
1
Document Number: 84339
For technical questions, contact: sensorstechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
APPLICATION NOTE
By Reinhard Schaar
UVA / UVB LIGHT SENSOR WITH I
2
C INTERFACE
The VEML6075 is an advanced ultraviolet (UVA / UVB) light sensor with an I
2
C protocol interface and designed in the
CMOS process.
An accurate VEML6075 UVI sensing system requires visible and infrared noise compensation and a teflon diffusor for cosine
angular response correction. The UVI formulas and related UVI formula coefficients are discussed here in detail. The coefficient
extraction method and a calculated example are also presented in this application note.
Fig. 1 - Block Diagram of the VEML6075
The VEML6075 is easily operated via a simple I
2
C command. It incorporates a photodiode, amplifiers, and analog / digital
circuits into a single chip. The VEML6075’s adoption of Filtron
TM
UV technology provides the best spectral sensitivity to cover
UVA and UVB spectrum sensing. It has excellent temperature compensation and a robust refresh rate setting without the need
for an external RC low-pass filter.
The VEML6075 shows linear sensitivity to solar UVA as well as UVB light and its sensitivity can easily be adjusted with selecting
the proper integration times.
The device can be used as a solar UV indicator for cosmetic / outdoor sport handheld products or any kind of consumer
products.
The VEML6075 comes within a very small surface-mount package with dimensions of just 2.0 mm x 1.25 mm x 1.0 mm
(L x W x H).
The VEML6075 operates within a supply voltage range from 1.7 V to 3.6 V. The necessary pull-up resistors at the I
2
C line can
be connected to the same supply as the micro controller is connected to, between 1.7 V and 3.6 V.
4
3SDA
GND
VEML6075
State machine
I
2
C interface
UV-PD
Oscillator
Timing
controller
V
DD
1
2
V
DD
SCL

VEML6075 数据手册 PDF

VEML6075 数据手册
VISHAY
11 页, 454 KB
VEML6075 其它数据手册
VISHAY
11 页, 454 KB
VEML6075 应用笔记
VISHAY
23 页, 1776 KB
Datasheet 搜索
搜索
百芯智造数据库涵盖1亿多个数据手册,每天更新超过5,000个PDF文件。
在线联系我们
黄经理 - 百芯智造销售经理在线,5 分钟前
您的邮箱 *
消息 *
发送