下载
Keywords:
Windows Driver, Evaluation Kit, Temperature Sensors, Amplifiers
APPLICATION NOTE 6415
HOW TO INSTALL THE USB DRIVER FOR EVALUATION
KITS/SYSTEMS THAT USE THE FTDI UART-TO-USB
CONVERTER CHIP (WINDOWS VISTA, WINDOWS 7,
AND WINDOWS 10 SUPPORT)
Abstract: This is a quick-start guide for EV kits and EV systems that use the FTDI FT232BL (or FT232BM) UART-to-USB
converter chip (32-pin TQFP) implemented with Maxim VID = 0x0B6A PID = 0x434D for the purpose of the USB PC
connection. This USB driver allows the EV kit software to support Windows Vista, Windows 7, and Windows 10.
Overview
This document provides a quick guide for EV kits and EV systems that use the FTDI FT232BL (or FT232BM) UART-to-USB
converter chip (32-pin TQFP) implemented with Maxim VID = 0x0B6A PID = 0x434D for the purpose of the USB PC
connection. This USB driver allows the EV kit software to support Windows Vista
, Windows 7, and Windows 10.
Follow these steps to start evaluating the EV kit now. The MAX6581 Evaluation Kit (
MAX6581EVKIT) is used in the
example figures.
1. Plug in the USB cable into a EV kit board and allow Windows to update the driver.
2. Make sure the Device Manager displays the information under Ports and Universal Serial Bus controllers as shown
in Figure 1.
® ®
Page 1 of 6
