For further information contact your local STMicroelectronics sales office.
April 2013 Doc ID 11967 Rev 6 1/5
5
STX-RLINK
Raisonance’s in-circuit debugger/programmer
for STM8, ST7, STM32, STR7 and STR9
Data brief
Features
■ In-circuit debugging and programming
■ Connection to application board via JTAG,
SWD, ST SWIM or ICC interface
■ USB interface to host PC
■ Powered from USB
Description
The RLink (STX-RLINK) is Raisonance’s
versatile, low-cost, in-circuit debugger and
programmer for a complete range of
STMicroelectronics microcontrollers (STM8, ST7,
STM32, STR7 and STR9). It connects to
application or evaluation boards for in-circuit
programming and debugging via an industry
standard JTAG-SWD connection for ARM
®
core-
based microcontrollers, via STMicroelectronics’
SWIM connection for STM8, or via an in-circuit
communication (ICC) connection for ST7
microcontrollers. ST72Cxxxx devices are not
supported.
The RLink, driven by Raisonance’s Ride7
integrated development environment provides
both unlimited in-circuit debugging and
programming of applications for STM8 and ST7.
The RLink allows in-circuit debugging of STM32,
STR7 and STR9 MCUs with debug code limitation
up to 1/2 the size of the device Flash if Flash is
less than or equal to 64 Kbytes, or up to 64
Kbytes if Flash is more than 64 Kbytes.
In combination with Raisonance’s free RFlasher7
programming software, RLink can also be used
as a very-low cost, dedicated in-circuit
programmer for STM8, ST7, STM32, STR7 and
STR9 microcontrollers.
Complete software tool sets are provided by
download at www.raisonance.com.
The RLink does not include trace support for
ARM® core-based devices with Embedded Trace
Macrocell™ such as STR9.
www.st.com
页面指南
