Datasheet
数据手册 > 微控制器,MCU,单片机 > Microchip > PIC12F1501-I/MS 数据手册PDF > PIC12F1501-I/MS 用户编程手册 第 1/40 页
PIC12F1501-I/MS
¥ 8.76
百芯的价格

PIC12F1501-I/MS 用户编程手册 - Microchip

更新时间: 2024-11-07 12:38:59 (UTC+8)

PIC12F1501-I/MS 用户编程手册

页码:/40页
下载 PDF
重新加载
下载
2011 Microchip Technology Inc. Advance Information DS41573C-page 1
This document includes the
programming specifications for the
following devices:
1.0 OVERVIEW
The devices can be programmed using either the high-
voltage In-Circuit Serial Programming™ (ICSP™)
method or the low-voltage ICSP™ method.
1.1 Hardware Requirements
1.1.1 HIGH-VOLTAGE ICSP
PROGRAMMING
In High-Voltage ICSP™ mode, these devices require
two programmable power supplies: one for V
DD and
one for the MCLR
/VPP pin.
1.1.2 LOW-VOLTAGE ICSP
PROGRAMMING
In Low-Voltage ICSP™ mode, these devices can be
programmed using a single V
DD source in the
operating range. The MCLR
/VPP pin does not have to
be brought to a different voltage, but can instead be left
at the normal operating voltage.
1.1.2.1 Single-Supply ICSP Programming
The LVP bit in Configuration Word 2 enables single-
supply (low-voltage) ICSP programming. The LVP bit
defaults to a ‘1’ (enabled) from the factory. The LVP bit
may only be programmed to ‘0’ by entering the High-
Voltage ICSP mode, where the MCLR
/VPP pin is raised
to V
IHH. Once the LVP bit is programmed to a ‘0’, only
the High-Voltage ICSP mode is available and only the
High-Voltage ICSP mode can be used to program the
device.
1.2 Pin Utilization
Five pins are needed for ICSP™ programming. The
pins are listed in Table 1-1.
PIC12F1501 PIC12LF1501
PIC16F1503 PIC16LF1503
PIC16F1507 PIC16LF1507
PIC16F1508 PIC16LF1508
PIC16F1509 PIC16LF1509
Note 1: The High-Voltage ICSP mode is always
available, regardless of the state of the
LVP bit, by applying V
IHH to the MCLR/
V
PP pin.
2: While in Low-Voltage ICSP mode, MCLR
is always enabled, regardless of the
MCLRE bit, and the port pin can no
longer be used as a general purpose
input.
TABLE 1-1: PIN DESCRIPTIONS DURING PROGRAMMING
Pin Name
During Programming
Function Pin Type Pin Description
RA1 ICSPCLK I Clock Input – Schmitt Trigger Input
RA0 ICSPDAT I/O Data Input/Output – Schmitt Trigger Input
MCLR
/VPP/RA3 Program/Verify mode P
(1)
Program Mode Select/Programming Power Supply
V
DD VDD P Power Supply
V
SS VSS P Ground
Legend: I = Input, O = Output, P = Power
Note 1: The programming high voltage is internally generated. To activate the Program/Verify mode, high voltage needs to be
applied to MCLR
input. Since the MCLR is used for a level source, MCLR does not draw any significant current.
PIC12(L)F1501/PIC16(L)F150X Memory Programming Specification
PIC12(L)F1501/PIC16(L)F150X
页面指南

PIC12F1501-I/MS 数据手册 PDF

PIC12F1501-I/MS 数据手册
Microchip
292 页, 2918 KB
PIC12F1501-I/MS 产品设计参考
Microchip
26 页, 884 KB
PIC12F1501-I/MS 用户编程手册
Microchip
40 页, 546 KB
PIC12F1501-I/MS 其它数据手册
Microchip
35 页, 406 KB
PIC12F1501-I/MS 产品修订记录
Microchip
2 页, 111 KB

PIC12F1501 数据手册 PDF

PIC12F1501-I/SN
数据手册
Microchip
MCU 8Bit PIC12 PIC RISC 1.75KB Flash 3.3V/5V 8Pin SOIC N Tube
PIC12F1501-E/P
数据手册
Microchip
8Bit Microcontroller, Flash, PIC12F, 20MHz, 1.75KB, 64Byte, 8Pins, DIP
PIC12F1501-I/P
数据手册
Microchip
MICROCHIP PIC12F1501-I/P 8Bit Microcontroller, Flash, PIC12F, 20MHz, 1.75KB, 64Byte, 8Pins, DIP
PIC12F1501T-I/SN
数据手册
Microchip
1.75KB Flash, 64B RAM, 6 I/O, CLC, CWG, NCO, 10Bit ADC, 8 SOIC 3.9mm(0.15in) T/R
PIC12F1501-E/SN
数据手册
Microchip
MCU 8Bit PIC12 PIC RISC 1.75KB Flash 3.3V/5V 8Pin SOIC N Tube
PIC12F1501-I/MS
数据手册
Microchip
MCU 8Bit PIC12 PIC RISC 1.75KB Flash 3.3V/5V 8Pin MSOP Tube
PIC12F1501-E/MS
数据手册
Microchip
MCU 8Bit PIC12 PIC RISC 1.75KB Flash 3.3V/5V 8Pin MSOP Tube
PIC12F1501-I/MC
数据手册
Microchip
MCU 8Bit PIC RISC 1.75KB Flash 2.5V/3.3V/5V Automotive 8Pin DFN EP Tube
PIC12F1501-E/MC
数据手册
Microchip
MCU 8Bit PIC12 PIC RISC 1.75KB Flash 2.5V/3.3V/5V 8Pin DFN EP Tube
PIC12F1501T-I/MS
数据手册
Microchip
MCU 8Bit PIC12 PIC RISC 1.75KB Flash 2.5V/3.3V/5V Automotive 8Pin MSOP T/R
Datasheet 搜索
搜索
百芯智造数据库涵盖1亿多个数据手册,每天更新超过5,000个PDF文件。
相关文档: PIC12F1501 数据手册
在线联系我们
黄经理 - 百芯智造销售经理在线,5 分钟前
您的邮箱 *
消息 *
发送